Changchun LG Washing Machine Repair: Stopped During Laundry Process
Release time: 2018-06-08
The LG automatic washing machine was stopped halfway and was not washed. The reason for this situation is that there are a lot of clothes that are dewatered in the washing machine at one time, and the clothes are biased and unbalanced during dehydration. The clothes are severely unbalanced. When the dehydration bucket starts to rotate, it will directly hit the safety switch to cause the washing machine to stop working, and the set washing program cannot be actively completed.
If the dehydration before the rinsing (starting after draining) is not a particularly severe imbalance of the clothes, it is more important that during the high-speed rotation of the dehydration bucket, the dehydration bucket (including the dehydration outer bucket) will sway and collide with the safety switch due to the centrifugal force. At this moment, the washing machine will actively perform the self-balancing process, that is, stop the dehydration, and switch to the irrigation-pulsator swing (balanced clothing)--drainage-dehydration again.
If the laundry dehydration balance requirement is not reached, the washing machine takes the initiative to perform several self-balancing procedures, and then buzzes and shuts down (the set program cannot be performed normally).
With regard to the full active washing machine, the solution is to reduce the amount of laundry that is put in the washing machine once.