北京pk10数学天才揭秘百度

News Center
    service items
    • Changchun TCL washing machine repair
    • Changchun Electrolux washing machine repair
    • Changchun Whirlpool washing machine repair
    • Changchun Siemens Washing Machine Repair
    • Changchun Rongshida washing machine repair
    contact details

    Address: Maintenance outlets in all urban areas of Changchun

    Changchun LG washing machine repair: door won't open

    Release time: 2018-07-03
    1. The drum washing machine has a safety lock function. The lid cannot be opened when the power is on. It may be that you cannot open the lid while the power is on.
    2. There is a PTC heating element inside the drum washing machine. When the door is closed, the PTC heats up, the bimetal is heated and twisted, the main power is connected, and the door lock is locked together. After a period of time after power failure, the bimetal cools and resets. The door may not open because the PTC heating element is damaged.
    3. Failure of the electric door lock of the drum washing machine will also cause the door of the washing machine not to open.
    The above three aspects may be the reason why the door of the drum washing machine cannot be opened. Therefore, when you encounter this situation, you need to carry out a comprehensive inspection from the above three aspects. Other professionals recommend that when you encounter this situation, you can try to open the door according to the following methods:
    Approach
    1. The position of the handle of the cover can be tapped by hand, and the door can be opened by resetting the plastic pin.
    2. If the knob is turned on for a long time after the knob is turned to the stop position, the knob cannot be opened again. You can turn the knob to the desired position again. After a few seconds, you will hear the "snap" of the door lock. I can open it.
    3. There is also an emergency switch in the lower right corner of the machine. When you open the cover outside the drain pump in the lower right corner, you will see a red plastic cable. Pull down in the straight direction of the cable. You will hear a slight movement of the door lock. Able to open the door. It is important to note that if there is water in the bucket, or the temperature is too high, the door will not open. The water in the bucket needs to be drained first and then processed through the above method.

    Previous post: Changchun Sanyo washing machine repair: reduce wear
    Next post: Sorry no data